Sikafloor®-19 PurCem®
Sikafloor®-19 NA PurCem® is a state-of the-art, trowel grade, heavy duty, phthalate-free, water dispersed polyurethane-based/cement and aggregate screed applicable in thicknesses ranging from 6 to 9 mm (1/4 to 3/8 in). It is designed to provide excellent resistance to abrasion, impact, chemical attack, thermal shock and other physical aggression and has a textured aggregate surface providing moderate slip resistance. Selected aggregate can be broadcast onto the wet screed to increase the surface texture. Sikafloor®-19 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Use
- Sikafloor®-19 NA PurCem® floors are primarily used to protect concrete substrates, but are equally effective over most steel surfaces that have been properly prepared and supported.
- Typically used in food processing plants, wet & dry process areas, freezers & coolers, thermal shock areas, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide temperature range from -40°C (-40°F) up to 120°C (248°F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Steam cleanable at 6 – 9 mm (1/4 – 3/8 in) thickness. Can also be easily maintained using commonly employed methods and phenol free detergents.
- Bond strength in excess of the tensile strength of concrete: concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Natural textured surface through the entire life of the product.
- Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® PurCem® Flooring System.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request) Refer to current price list for availability.
Packaging
23.1 kg (10.64 L) unit / 50.9 lb (2.81 US gal.) unit.
Consists of 3 Components: A + B + C
Sikafloor®-20 PurCem®
Sikafloor®-20 NA PurCem® is a state-of the-art, easy to trowel, heavy duty, phthalate-free, water dispersed polyurethane-based/cement and aggregate screed applicable at thicknesses ranging from 6 to 9 mm (1/4 to 3/8 in). It is designed to provide excellent resistance to abrasion, impact, chemical attack, thermal shock and other physical aggression and has a textured aggregate surface providing moderate slip resistance. Selected aggregate can be broadcast onto the wet screed to increase the surface texture. Sikafloor®-20 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Use
- Sikafloor®-20 NA PurCem® floors are primarily used to protect concrete substrates, but are equally effective over most steel surfaces that have been properly prepared and supported.
- Typically used in food processing plants, wet & dry process areas, freezers & coolers, thermal shock areas, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Easy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials.
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide temperature range from -40°C (-40°F) up to 120°C (248°F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Steam cleanable at 6 – 9 mm (1/4 – 3/8 in) thickness. Can also be easily maintained using commonly employed methods and phenol-free detergents
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Natural textured surface through the entire life of the product.
- Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® PurCem® Flooring System.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request) Refer to current price list for availability.
Packaging
20.8 kg (9.4 L) unit / 45.8 lb (2.5 US gal.) unit.
Consists of 3 Components: A + B + C
Sikafloor®-22 PurCem®
Sikafloor®-22 NA PurCem® is a state-of the-art, medium duty, phthalate-free, water dispersed polyurethane-based/cement and aggregate screed applicable at thicknesses ranging from 4.5 to 6 mm (3/16 to 1/4 in). It is designed to provide good resistance to abrasion, impact, chemical attack and other physical aggression, including thermal shock, when applied at 6 mm (1/4 in). Selected aggregate can be broadcast onto the wet screed to produce a surface texture with slip resistance. Sikafloor®-22 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Use
- Sikafloor®-22 NA PurCem® floors are primarily used to protect concrete substrates, but are equally effective over most steel surfaces that have been properly prepared and supported.
- Typically used in food processing plants, wet & dry process areas, freezers & coolers, thermal shock areas, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Easy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials.
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide temperature range from -40°C (-40°F) up to 120°C (248°F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Steam cleanable at 6 mm (1/4 in) thickness. Can also be easily maintained using commonly employed methods and phenol free detergents.
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® PurCem® Flooring System.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request) Refer to current price list for availability.
Packaging
27.1 kg (14.0 L) unit / 59.7 lb (3.70 US gal.) unit.
Consists of 3 Components: A + B + C
Sikafloor®-24 PurCem®
Sikafloor®-24 NA PurCem® is a state-of-the-art, medium duty, phthalate-free, water dispersed
polyurethane-based/cement and aggregate screed, applicable at
thicknesses ranging from 2 to 4 mm (80 to 160 mils). It is designed to
be installed as a self-levelling floor topping that provides an
easy-to-clean, smooth surface with medium slip resistance values and is
typically used for general, industrial applications. Sikafloor®-24 NA
PurCem® represents superior polyurethane/ cement technology, combining
easier application, resistance to blistering and improved performance.
Use
- Typically used in areas of medium to heavy loading and abrasion, to provide a smooth, flat and thin self-leveling layer in general industrial areas, including warehouses, production facilities, laboratories and workshops, either with or without a Sikafloor® sealer.
- As thin layer, flat but slip-resistant screed in commercial environments, with a suitable UV-stable Sikafloor sealer for retention of aesthetics.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Easy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials.
- Longer pot life permits increased productivity with less waste.
- Wide range of application temperatures from 7°C (45°F) minimum to 38°C (100°F) maximum.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Good abrasion resistance, providing cost effective and durable floor topping.
- Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide, wet or dry temperature range from -5°C (41°F) at 2.0 mm and -10°C (14°F) at 4.0 mm up to 120°C (248°F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® PurCem® Flooring System.
- Compatible with a wide range of Sikafloor epoxy or polyurethane resin sealers, enabling UVstable sealer to be applied where required. Consult Sika Technical Sales for full details.
- Easily maintained using commonly employed methods and phenol free detergents.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request)
Refer to current price list for availability.
Packaging
34.87 kg (20.15 L) unit / 76.87 lb (5.33 US gal.) unit.
Consists of 3 Components: A + B + C
Sikafloor®-29 PurCem®
Sikafloor®-29 NA PurCem® is a state-of-the–art, vertical grade, phthalate-free, water dispersed polyurethane-based/cement and aggregate mortar applicable at thicknesses ranging from 3 to 6 mm (1/8 to 1/4 in). It is designed to for use in detailing and coving works to provide excellent resistance to abrasion, impact, chemical attack, and other physical aggression and has a finely textured, smooth aggregate surface. Sikafloor®-29 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Use
- Sikafloor®-29 NA PurCem® is primarily used to protect vertical concrete substrates, but is equally effective over most steel surfaces that have been properly prepared and supported.
- Typically used in food processing plants, wet and dry process areas, freezers and coolers, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Designed specifically for trowel application to vertical surfaces and at wall/floor junctions.
- Easy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials.
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retain its physical characteristics through a wide temperature range from -40°C (-40°F) up to 120°C (248°F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- High abrasion qualities result from its pure silica aggregate structure.
- Easily maintained using commonly employed methods and phenol free detergents.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request) Refer to current price list for availability.
Packaging
25.3 kg (11.9 L) unit / 55 lb (3.1 US gal)
Consists of 3 Components: A + B + C
Sikafloor®-31 PurCem®
Sikafloor® -31 NA PurCem® is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete, as primer/sealer for Sikafloor® -24 NA PurCem® and as a top coat for Sikafloor® PurCem® broadcast textured systems. It is an economical and versatile material that improves adhesion and mitigates outgassing of substrates as a primer, while providing excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Sikafloor® -31 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Use
- Sikafloor®-31 NA PurCem® is primarily used as a chemically resistant high build coating usedto protect horizontal and vertical concrete substrates, but is equally effective over Sikafloor®-19NA PurCem®, Sikafloor®-20 NA PurCem®, Sikafloor®-22 NA PurCem®, Sikafloor®-24 NA PurCem® and Sikafloor®-29 NA PurCem®.
- Typically used in food processing plants, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Economical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials.
- Versatile material suitable for application as a primer, standalone coating and top coat for other PurCem systems.
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart. - Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide temperature range from -10°C
(14°F) up to 90°C (194°F). - Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Excellent long term wear resistance from a two coat application.
- Easily maintained using commonly employed methods and phenol free detergents.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Colour
RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, Special colours (on request) Refer to current price list for availability.
Packaging
5.5 kg (3.82 L) unit / 12.1 lb (1.03 US gal.) unit.
Consists of 3 Components: A + B + C
Sikafloor®-33 N PurCem®
Sikafloor®-33 NA PurCem® is state-of-the-art,
high-build coating with a matte finish, based upon pthalate-free, water
dispersed polyurethane/cement and aggregate technology applied at 10
mils per coat. It is designed as a standalone coating for concrete and
as a top coat for Sikafloor® NA PurCem® systems. It is new technology
that significantly improves colour fastness, virtually eliminating the
yellowing commonly associated with light coloured, conventional PUC
products. It also provides a higher performing sealed surface with
excellent chemical-, very good abrasion, and enhanced
mechanical-resistance. Sikafloor®-33 NA PurCem® represents superior
polyurethane/cement technology, combining easier application, resistance
to blistering and improved performance.
Use
- Sikafloor®-33 NA PurCem® is primarily used as a chemically resistant high build coating used to protect horizontal and vertical concrete substrates, but is equally effective over Sikafloor®-19 NA PurCem®, Sikafloor®-20 NA PurCem®, Sikafloor®-22 NA PurCem®, Sikafloor®-24 NA and Sikafloor®-29 NA PurCem® systems.
- Typically used in food processing plants, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants.
Characteristics and Advantages
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Economical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials.
- Versatile material suitable for application as a standalone coating and top coat for other PurCem systems.
- Longer pot life permits increased productivity with less waste.
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart.
- Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
- Performs and retains its physical characteristics through a wide temperature range from -10 °C (14 °F) up to 90 °C (194 °F).
- Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
- Behaves plastically under impact; deforms but will not crack or debond.
- Excellent long term wear resistance from a two coat application.
- Easily maintained using commonly employed methods and phenol free detergents.
- Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Paints and Coatings.
- Meet the requirements of CFIA and USDA for use in food plants.
Colour
Four standard stock colours:
RAL 3009 Oxide Red, RAL 7046 Telegrey 2
RAL 7038 Agate Grey, RAL 1001 Beige
Two standard, non-stock colours that require lead time:
RAL 5015 Sky Blue, RAL 6010 Grass Green
Custom colours subject to a minimum order.
Packaging
6.09 kg (4.54 L) unit / 13 lb (1.2 US gal.) unit.
Consists of 3 Components: A + B + C
6.09 kg (4.54 L) unit / 13 lb (1.2 US gal.) unit.
Consists of 3 Components: A + B + C
Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]
