Special Floor Tools
Glass-Fibre Based, Embedding Fabric for Sikagard® Duroplast Epoxy Resin F.R.S. (Fabric Reinforced Systems) for Walls and Ceilings
Use
- Used in conjunction with Sikagard® Duroplast epoxy resin based F.R.S. (Fabric Reinforced Systems) on interior walls and ceilings.
- Used to improve long term durability in heavy service and demanding environments,such as hospitals, pharmaceutical facilities, laboratories, clean rooms, animalholding areas, commercial kitchens, food and beverage facilities, service corridors,locker rooms and shower areas.
Characteristics and Advantages
- Easy to install, simple placing and embedment.
- Weave pattern allows resin to encapsulate the fabric.
- Proven use with Sika® resin systems.
Colour
White
Packaging
1 m x 50 m (3.2 ft x 164 ft) roll (+/- 1%)
Sikagard® Duroplast-100 N
Sikagard® Duroplast®-100 N is a two-part, high solids, low odour, low VOC, finely textured, glossy, pigmented epoxy floor and wall coating. It produces a durable, easy to clean ceramic-like finish on interior surfaces. Can be applied over properly prepared and primed concrete, concrete masonry, common steel, or gypsum board substrates. It is also used as binder for multi-layered, glass fabric-reinforced wall lining systems that improve the durability of gypsum board against impact. Sikagard® Duroplast®-100 N contains a Steri-Septic antimicrobial additive that inhibits the growth of bacteria, molds, mildew and fungi for the lifetime of the coating.
Use
- Hospitals and medical research facilities.
- Pharmaceutical laboratories and production areas.
- Veterinarian and animal holding areas.
- Educational and recreational premises.
- Commercial kitchens and service corridors.
- Food and beverage processing areas.
- Packaging and storage areas.
- Rest rooms, locker rooms and showers.
Characteristics and Advantages
- Durable seamless surface that is easily cleaned and maintained.
- Waterproof, suitable for in-service areas exposed to high humidity.
- Aesthetic, fine textured, glossy finish.
- Good chemical and abrasion resistance.
- High solids, low VOC, neutral odour.
- Fast recoat cure properties are ideal for shutdown or fast turnaround projects.
- Excellent opacity and colour hiding capability.
- Can be reinforced with fiberglass fabric.
- Contains the Steri-Septic antimicrobial additive which remains permanent.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Paints and Coatings.
- Canadian Food Inspection Agency acceptance.
Colour
RAL 9016 Traffic White
Special colours available on request.
Packaging
3.78 L (1 US gal.) and 18.9 L (5 US gal.) units
Sika® Duroplast 150
UV Resistant, High Solids, Low Odour, Water Based Epoxy Wall Coating three Gloss Levels: Matte, Satin and Gloss
Use
- Hospitals and medical research facilities.
- Pharmaceutical laboratories and production areas.
- Veterinarian and animal holding areas.
- Educational and recreational premises.
- Commercial kitchens and service corridors.
- Food and beverage processing areas.
- Packaging and storage areas.
- Rest rooms, locker rooms and showers.
Characteristics and Advantages
- Durable seamless surface that is easily cleaned and maintained.
- Waterproof, suitable for in-service areas exposed to high humidity.
- Aesthetic, fine textured finish.
- Available in three gloss levels; Matte, Satin and Gloss.
- Superior resistance to UV colour change compared to other epoxy coatings.
- Good chemical and abrasion resistance.
- High solids, low VOC, low odour.
- Fast recoat cure properties are ideal for shutdown or fast turnaround projects.
- Superior resistance to blushing during application and cure, even under severe conditions.
- Excellent opacity and colour hiding capability.
- Contains the Steri-Septic antimicrobial additive which remains permanent.
- Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Paints and Coatings.
- Canadian Food Inspection Agency acceptance for use in food plants in Canada.
Colour
RAL 9016 Traffic White
Custom colours available on request.
Packaging
3.78 L (1 US gal.) and 18.9 L (5 US gal.) units
Sikafloor® Duochem-6001
Water-Based, Easy to Clean, Epoxy Coating with Wear and Mild Chemical Resistance for Floors, Walls and Ceilings
Use
■ As a interior coating for surfaces in
chemical, pharmaceutical and food processing and preparation facilities,
warehouses and workshops which require coating whilst normal operations
continue.
■ Use on floors, walls, ceilings and machinery where a
semi-gloss, wear resistant finish is needed, which will withstand
contact with mildly corrosive chemicals and scrubbing during wash- down.
■ As a thin -film, vapour permeable sealer on concrete above, on, or below grade.
Characteristics and Advantages
■ Water-based, ideal for interior application without disruption to ongoing operations.
■ Able to withstand light or moderate traffic (i.e. pedestrians and pneumatic tires).
■ Good resistance against mild corrosive chemicals, wear factors and scrubbing while being cleaned.
■ Permeable to water vapour – suitable for application for above-, on- and belowgrade.
■ Canadian Food Inspection Agency (CFIA) acceptance.
■ Potential for LEED® Canada credit (Low-Emitting Materials – Paints and Coatings).
Colour
Colour RAL 7012 Basalt Grey, RAL 7046 Telegrey 2
Special colours available on request.
Packaging
3.78 L (1 US gal.) and 18.9 L (5 US gal.) units
Sikagard® Duroplast EE
Sikagard® Duroplast® EE is a two-part, high performance blockfiller designed to prime and fill small pours and reduce surface irregularities on properly prepared walls and ceilings. It serves to fill voids on porous surfaces and improve both the adhesion and appearance of high quality Sikagard® Duroplast® finishes that will be exposed to high levels of moisture in service.
Use
- Interior and exterior applications.
- On wall and ceiling constructed from concrete block, masonry units, poured or precast concrete to obtain a filled surface profile.
- To provide superior bonding properties needed to support two-part epoxy and urethane finish coats in high abuse installation.
- To fill and seal walls and ceilings with variable absorption which might excessively absorb coatings.
- Wet and dry process areas subject to repeated cleaning such as; food and beverage processing plants, health care facilities, pharmaceutical, laboratories, animal care facilities, wash bays, locker and shower rooms.
- Used in new construction and maintenance work.
Characteristics and Advantages
- Material is convenient to proportion, 1:1 by volume resin to hardener ratio.
- Low odour and low VOC.
- Excellent bond and adhesion promotion.
- Superior moisture resistance.
- Good chemical resistance.
- Good bridging and filling properties.
- Good hiding capacity.
- Provides a more uniform even surface to coat.
- Fully compatible with Sikagard® Duroplast® finishes.
- Clean-up with water.
- LEED® Canada compliant < 100 g/L.
Colour
Off-white
Packaging
37.85 L (10 US gal.) units
Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]
