Sika® Everset® Type II is a two-component, 100%
solids epoxy gel. It is fast drying and suitable for use on both
horizontal and vertical surfaces.
Use
■ Ideal for bonding to concrete, steel, wood and tiles. ■ An excellent non-shrinking permanent crack filler for concrete, wood and steel. ■ “Pick Proof” Sealant.
Characteristics and Advantages
■ Durable and impervious to water. ■ 100% solids, odourless. ■ Colour-coded to ensure uniform mixing. ■ Self-primed, excellent adhesion to concrete. ■ Non-sag characteristic. ■ Easily applied. ■ May be sanded within 6 to 12 hours after mixing. ■ Product recognized by the British Columbia Ministry of Transportation (BC MoT)
Colour
Concrete Grey
Packaging
5 L (1.32 US gal.) unit
Sika® Duoflex NS
Two-Component, Polysulphide Sealant
Use
Sika Duoflex is suitable for either exterior or interior use in both static and dynamic joints.
Sika Duoflex NS is suitable for sealing:
Joints in precast concrete.
Joints in glass and metal curtain wall construction.
Expansion and control joints in concrete and masonry walls.
Joints in metal siding.
Perimeters of aluminum window frames and metal panels.
Gas stations.
Sika Duoflex SL is suitable for sealing:
Expansion and control joints in concrete floors.
Joints in podium deck structures.
Expansion joints in tile and brick flooring.
Gas stations.
Characteristics and Advantages
Tough, elastic, rubber-like seal.
Remains flexible with expansion and contraction of building
component without adhesive or cohesive failure, under suitable design
conditions.
Stays resilient within a wide temperature range.
Excellent resistance to water, oils, grease, most solvents, mild acids and alkalis.
Tenacious adhesion to concrete, metal, wood, glass, stone, ceramic
and masonry surfaces in any combination, typically without the need for
priming.
Effective under constant immersion or saturated conditions, when suitably primed.
USDA acceptance (NS grade only).
Colour
Bronze
Packaging
5.7 L (1.5 US gal.) unit
Sika® Level-01 Primer
Sika® Level-01 PrimerCA is a one-component,
water-dispersed, solvent-free, acrylic-based solution used to prime and
seal floor surfaces prior to the application of Sika® Level-125CA
underlayments and Sikafloor® Level-25CA and Sikafloor® Level-50CA
overlayments.
Use
As a primer/sealer for absorbent substrates
including concrete and cement screeds. Particularly suitable as an
adhesion promoter and surface sealer beneath Sika® Level-125CA,
Sikafloor® Level-25CA and Sikafloor® Level-50CA, enhancing the bond and
integrity of the underlayment/overlayment when applied onto porous
substrates.
Characteristics and Advantages
Ready to use, no dilution required.
Water-based and solvent-free; user and environmentally friendly.
Penetrates substrate to reduce outgassing and formation of bubbles in the underlayment/overlayment.
Prevents water loss from the underlayment/overlayment into the substrate.
Quick-drying and fast film formation to increase productivity.
Achieves excellent bond values throughout the recommended range of application temperatures.
Effectively seals concrete surfaces in a single, economic operation.
Colour
White
Packaging
3.78 L (1 US gal.) jug (4/carton) and 18.9 L (5 US gal.) pail
Sika® Level-03 Primer CA
Sika® Level-03 PrimerCA is a one-component,
water-dispersed and low solvent-containing, acrylic-based solution used
to prime concrete and wood surfaces prior to the application of Sika®
Level-125CA underlayments.
Use
As a multi-substrate primer on absorbent
substrates, including concrete, cement screeds and suitable wooden
subfloors. Sika® Level-03 PrimerCA is particularly effective as an
adhesion promoter beneath Sika® Level underlayments, consolidating
porous substrates and enhancing bond strengths.
Characteristics and Advantages
Versatile primer, suitable for concrete and wood, so reducing number of materials on-site.
Ready to use, no dilution or mixing required.
Water-based and low solvent content; user and environmentally friendly.
Pigmented to ensure coverage and indicate time to apply the underayments.
Penetrates substrate to reduce outgassing and bubble formation in self-levelling underlayments.
Provides consolidated substrates to promote bond of underlayments.
Prevents water loss from the underlayment into the substrate.
Quick-drying and fast film formation to increase productivity.
Achieves excellent bond values throughout the recommended range of application temperatures.
Very convenient where a single primer is required for differing surfaces.
Colour
Green tint
Packaging
1 L (33.8 fl. oz) jug, 4/carton 4 L (1.05 US gal.) jug, 4/carton
Sika® Level-125
Polymer-Modified and Sika® ViscoCrete® Improved,
Self-Levelling Cementitious Underlayment for Use at 1 to 38 mm (1/25 to 1
1/2 in) Thickness
Use
Interior floor levelling and smoothing applications in pedestrian areas, where floor coverings are to follow, such as:
Residential – domestic properties, condominiums and high rise construction.
Characteristics and Advantages
Easy and quick to install.
Zero VOC content and low odour.
Highly fluid and self-levelling.
Manual or pumpable application.
Feather-edging acceptable in pedestrian areas.
Levels new and renovates old floors.
Rapid drying, can be walked on after 8 hours at 23°C (73°F).
Ceramic tiles and natural stone can be installed after 24 hours.
Floor coverings (carpet, vinyl, PVC, rubber, engineered wood flooring) can be installed after 1 to 3 days.
Suitable on floors with in-floor radiant heating.
Excellent underlayment for tiles, sheet products and wood floor bonding systems.
Colour
Concrete Grey
Packaging
22.7 kg (50 lb) bag
Sika® Loadflex®
Two-Component, Epoxy-Urethane, Load-Bearing, Self-Levelling, Control Joint Filler
Use
Sika Loadflex is recommended for use as a filler for interior,
horizontal saw cut or preformed control joints in facilities such as
warehouses and plants, where such joints are subject to load bearing
conditions involving wear and impact.
Sika Loadflex is also used for repairing interior concrete slabs that have experienced random cracking due to shrinkage.
Characteristics and Advantages
Hard load bearing sealant designed to withstand industrial traffic.
Provides for even load transfer across floor joints, thereby protecting joint edges from breakdown.
Seals joints from collecting dirt, dust, and debris.
Easily installed by pouring or gunning.
Excess material can be shaved off smooth as early as 12 hours.
Canadian Food Inspection Agency acceptance.
Colour
Limestone
Packaging
3.41 L (0.9 US gal.) unit 10 L (2.6 US gal.) unit
Sika® Loadflex-524 EZ
(Replaces Sika Loadflex Polyurea)
Sika® Loadflex®-524 EZ is a technologically advanced, two-component,
quick-setting, semirigid, solvent-free, self-levelling control joint
filler.
Use
Sika® Loadflex®-524 EZ is recommended for use as filler for static
interior, horizontal saw cuts or preformed control and construction
joints.
Typically installed in facilities such as warehouses and industrial
plants, where such joints are subject to load-bearing conditions
involving wear and impact.
Sika® Loadflex®-524 EZ is also used for repairing interior concrete
slabs that have experienced random cracking due to shrinkage.
Characteristics and Advantages
Quick-set formula reduces down time.
Excess material can be shaved off smooth as early as 15 minutes or as late as 24 hours after placement at 23°C (73°F).
Cures at temperatures down to -25°C (-13°F).
Hard, load-bearing filler designed to withstand industrial traffic.
Provides even load transfer across floor joints, thereby protecting joint edges from breaking down under traffic.
Two components, easy to use, 1:1 mix ratio.
Improved consistency to allow easier dispensing and reduced blockage of equipment.
Seals joints from collecting dirt, dust and debris.
Improved moisture sensitivity.
Approved by the Canadian Food Inspection Agency.
Colour
37.8 L (10 US gal.) units : Grey and RAL 3010 Brick (RAL 3010 Brick, special order with min. quantity)
Packaging
37.8 L (10 US gal.) unit 600 mL (20 US fl. oz) side-by-side, coaxial cartridges, 12 per case.
Sika® Pronto-11
Convenient, Plant-Proportioned, Solvent-Free, Mortar System
Use
On grade, above and below grade on concrete and mortar.
On horizontal surfaces.
On structural repair of concrete.
As a structural grout for base plates up to 600 mm x 600 mm.
For patching and overlays where a highly chemical resistant mortar is required.
For patching concrete structures, roadways, bridge decks, joint headers and floors.
Characteristics and Advantages
High early-strength.
High compressive strength.
High flexural strength.
High chemical resistance.
Applicable down to -10°C (14°F) (Regular).
Applicable down to -25°C (-13°F) (Sub-Zero).
Easy, on-site batching.
Not flammable.
Not a vapour barrier.
Low odour.
No priming required for most applications.
Canadian Food Inspection Agency acceptance for freezer floors.
Ministry of Transport Québec acceptance.
Colour
Grey
Packaging
Component A: 3 L (0.8 US gal.) jug Component B: 21.9 kg (48 lb) bag Sub-Zero Component: 575 mL (19 oz) can
Sikadur®-32 Hi-Mod
High-Modulus, High-Strength, Epoxy-Based Protective Coating and Bonding Adhesive
Use
Protective coating for reinforcing steel.
Bond fresh, plastic concrete to hardened concrete and steel.
Grout bolts, dowels, and pins etc.
Grout horizontal cracks in structural concrete and wood by gravity feed.
Structural adhesive for concrete, masonry, metal, wood, etc.
Characteristics and Advantages
High-build, chemically resistant and protective coating.
Super-strength bonding/grouting adhesive.
Insensitive to moisture before, during and after cure.
Excellent adhesion to most structural materials.
Easy to mix: 1:1 ratio.
Easy to use for bonding/grouting applications.
Free of service-inhibiting polysulfides.
Fast initial set; rapid gain to ultimate strengths.
USDA-approved for use in food plants.
Meets ASTM C881, Type I, II and V, Grade 2, Class B and C, epoxy resin adhesive.
Ministère des Transports du Québec acceptance.
Colour
Concrete Grey
Packaging
10 L (2.6 US gal.) unit
Sikadur®-55 SLV
Healer/Sealer, Super Low-Viscosity, Moisture-Insensitive Epoxy Resin, Crack Healer/Penetrating Sealer
Intended for use in all properly designed working joints with a minimum depth of 6 mm (1/4 in).
Ideal for vertical and horizontal applications.
Can be applied at temperatures as low as 4°C (39°F).
Adheres to most substrates commonly found in construction.
An effective sealant for use in Exterior Insulation Finish Systems (EIFS).
Submerged environments, such as canal and reservoir joints.
Characteristics and Advantages
Capable of ± 50 % joint movement.
Chemical cure allows the sealant to be placed in joints exceeding 13 mm (1/2 in) in depth for non-moving joint.
High elasticity with a tough, durable, flexible consistency.
Exceptional cut and tear resistance.
Exceptional adhesion to most substrates without priming.
Available in 35 standard architectural colours.
Colour uniformity assured via Color-pak system.
Non-sag even in wide joints.
Easy to mix.
Paintable with water, oil, and rubber-base paints.
Sikaflex 2c Booster available for faster cure in cold weather.
ANSI/NSF Standard 61 approved for potable water contact (special order Pre-tinted Limestone only).
Meets ASTM C920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O
Meets Federal Specification TT-S-00227E, Type II, Class A
Meets Federal Specification TT-S-001543A
Meets Federal Specification TT-S-00230C
Meets CAN/CGSB 19.24 – M90
USDA approved.
Canadian Food Inspection Agency acceptance.
Ministry of Transport Québec acceptance.
UL certified to CAN/ULC-S115-05: Standard Method of Firestop Systems
and to ANSI/UL 2070: Fire Resistance of Building Joint Systems
(FF-S-1034, FW-S-1020, HW-S-1018, WW-S-1037) for use in Canada.
Traffic grade available, see Sikaflex 2c NS EZ Mix TG Product Data Sheet for specifications.
Colour
35 standard architectural colours are available. Special colours available on request.
Packaging
5.7 L (1.5 US gal.) unit 11.4 L (3 US gal.) unit Color-pak and Sikaflex 2c Booster sold separately.
Sikaflex®-1c SL
Sikaflex®-1c SL is a single-component, self-levelling, premium-grade polyurethane sealant with accelerated curing capacity.
Use
Sikaflex®-1c SL is used to seal horizontal movement joints in concrete and cementitious substrates such as:
Driveways and garage floors.
Sidewalks and pavements.
Balcony decks.
Civil structures.
Terrace decks.
Pedestrian plazas
Warehouse and factory floors.
Characteristics and Advantages
Capable of ± 25 % joint movement.
Convenient, easy-to-use packaging.
1-component, no mixing required.
Self-leveling, pourable consistency.
Accelerated curing.
Can be applied to green concrete 24 hours after pour.
Can be applied to damp concrete 1 hour after getting wet.
Resists aging and weathering.
Jet fuel resistant.
Meets Federal Specification TT-S-00230C, Type 1, Class A.
Meets ASTM C920, Type S, Grade P, Class 25.
Ministry of Transport Quebec Acceptance.
Colour
Concrete Grey
Packaging
300 mL (10.1 fl. oz) cartridge – 12/case 858 mL (29 fl. oz) cartridge – 12/case
Use on any horizontal old or new concrete
surface, interior or exterior where a hard, light to moderate abrasion
resistant surface is required:
Educational and medical facilities.
Warehouses and industrial plants.
Food-processing plants.
Stores and shopping malls.
Parking structures.
Gas stations.
Offices and multi-residential buildings.
Characteristics and Advantages
Ready to use.
Easy to apply.
Non-yellowing.
Good penetration.
Colourless and odourless.
Improved chemical and abrasion resistance.
Reduced dusting on lower quality concrete floors.
Complies with today’s environmental, health and safety regulations.
Canadian Food Inspection Agency acceptance.
Colour
Clear
Packaging
20 L (5.3 US gal.) pail 200 L (53 US gal.) drum
Sikafloor® Level-25
Sikafloor® Level-25CA is a one component, polymer
modified, versatile and durable floor pumpable cementitious screed for
interior concrete floors which can be applied manually or by pump to
achieve rapid, flat, economic substrate levelling prior to the
application of the final floor finish. Typical application thickness 5 –
25 mm (3/16 – 1 in).
Use
Factories.
Commercial buildings.
Cellars.
Corridors.
Warehouses.
Hospitals.
Domestic.
Fast track construction.
Levelling pre-cast concrete slabs.
Characteristics and Advantages
Self-levelling and highly fluid
Pumpable or manual application
Levels and renovates old floors
Rapid drying
4 hour walk on time [23 °C (73 °F)]
Excellent underlay for tiles, sheet systems and wood floor bonding systems
Excellent underlay for resin flooring
Low odour
May be used as a wearing surface
Colour
Concrete Grey
Packaging
25 kg (55 lb) bag
SikaQuick®-1000
Rapid-Hardening Repair Mortar with Extended Working Time
Use
Use on grade, above and below grade on concrete.
Highway overlays and repairs.
Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
Full depth patching repairs.
Horizontal repairs of concrete and mortar.
Characteristics and Advantages
Specifically suited for hot weather applications when extended working time is required.
Rapid hardening as defined by ASTM C928.
Can be used with Sikacem Accelerator for cold conditions, increased early strengths and reduced curing time.
Compatible with Sikafloor, SikaBond, and Sika AcouBond systems.
Allows application of an epoxy coating within 6 hours.
Freeze/thaw resistant.
Easy to use; economical patching and labour saving material.
Contains no added chlorides.
Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
Open to foot traffic in 4 hours, to vehicle traffic in 6 hours [23°C (73°F)].
Easily applied to clean, sound substrates.
Not a vapour barrier.
Canadian Food Inspection Agency acceptance.
Colour
Concrete Grey
Packaging
25 kg (55 lb) bag
SikaQuick®-2500
Very Rapid-Hardening Repair Mortar
Use
Use on grade, above and below grade on concrete.
Highway overlays and repairs.
Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
Full depth patching repairs.
Horizontal repairs of concrete and mortar.
Characteristics and Advantages
Very rapid hardening as defined by ASTM C928.
Can be used with Sikacem Accelerator for cold conditions, increased early strengths and reduced curing time.
Compatible with Sikafloor, SikaBond, and Sika AcouBond systems.
Allows application of an epoxy coating within 4 hours.
Freeze/thaw resistant.
Easy to use; economical patching and labour saving material.
Contains no added chlorides.
Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
Open to foot traffic in 45 minutes, to vehicle traffic in 1 hour [23°C (73°F)].
Easily applied to clean, sound substrates.
Not a vapour barrier.
Canadian Food Inspection Agency acceptance.
Colour
Concrete Grey
Packaging
25 kg (55 lb) bag
Sika® Duochem-8107
Sika® Duochem-8107 is a two-component, high-solids
containing, epoxy gel. It is suitable for use on both horizontal and
vertical surfaces, owing to its highly thixotropic consistency, and it
cures to achieve a strong bond and high strength. Sika® Duochem-8107 is
versatile in its uses, including application as an adhesive, a crack
filler and a vertical resurfacer.
Use
Use to bond to concrete, steel, wood and tiles.
An excellent non-shrinking permanent crack or static-joint filler for concrete, wood and steel.
A ‘pick-proof’ sealant for custodial suites and holding cells.
Use to resurface horizontal and vertical concrete prior to applying Sikafloor® or Sikagard® resin systems.
Characteristics and Advantages
High- solids content with low VOC content.
Colour-coded to ensure complete and correct mixing.
Easy to mix (2:1 by volume ratio) and apply.
Thixotropic, non-sag characteristic allows horizontal and vertical application.
Self-priming, excellent adhesion to concrete.
Cures to provide hard and impact resistant material.
May be mixed with silica sand to produce patch repair material (consult Sika Canada Inc).
Very low water absorption and highly durable.
Fully compatible with Sikafloor® and Sikagard® resin systems.
Canadian Food Inspection Agency (CFIA) acceptance.
Colour
Grey
Packaging
3 L (0.8 US gal.) unit
Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]
